So why would you want to make a solar powered pump birdbath?

The Advantages Are:

a: The moving water in the fountain stop its from going stagnant

b: The pump does not have to plugged into your power supply

c: No inverter is needed since the pump operates on direct current.

d: The pump uses minute power (only 6volts) so very few solar panels are needed

e: No batteries are required, since the pump only really needs to operate during the day when the sun is out and the birds are in the garden.

f: You could learn to make your own solar panels, reducing the cost even further.

g: The birdbath is wireless making it very portable.

What parts and materials are needed to build a solar powered pump birdbath?

The simplest option would be for you to add solar panels to an already working birdbath and fountain.

The cheaper, more labor intensive approach would be to get a birdbath with the right holes drilled for the fountain to be installed. And then add on the pump, fountain attachment, irrigation and power supply.

If you decide to make your own fountain, you will need:

The Birdbath:

Here you have a choice of cascading fountains, copper fountains, terracotta birdbaths, resin fountains, or the conventional ceramic birdbath. Just make sure a pump system can be installed on the birdbath.

The Fountain Spout:

Depending on whether you want the water to trickle or spout out the top, you can get the right attachment from most hardware stores or garden centers.

Small DC Pump:

The next part is buying the small dc pump. A typical 6 volt pump should be adequate, but you may need to go bigger, if the birdbath or water feature is larger than normal.

Thin, Flexible PVC Pipe:

This is what the water will flow through. It is best to ask your nursery about the various irrigation options. Otherwise, get ideas from finished pump powered fountains. As a rule of thumb, the PVC piping needs to be narrow to maintain enough water pressure.

Silicon Sealant:

This is used to seal all joins where the water could escape from, and also to insulate any bare wire from getting wet where it has been joined.

The Solar Panels:

This is what sets this off-grid system apart from conventionally powered birdbath fountains. The pump will help determine how many solar panels you need. For a 6 volt DC pump, you will need at least a 6 volt solar panel, but rater double up on the solar panels for times when the sun is weak.

NB: For the solar panels, there are two options:

1 : Buy a small commercially available solar panel from any outlet, such as Wallmart.

2 : Make it yourself. With the right guide it is rather easy and much cheaper to make your own solar panel in a matter of hours. If this is something you would love to try do, then keep reading…

For the solar panel to operate effectively it needs to be fitted in a frame and angled in the direction of the sun. Placing it under a tree will not help.

How simple is it to build?

If you have all the tools and materials and any diy experience, you could have a working solar powered pump birdbath within in a matter of hours – that’s if all goes to plan…

A good idea would to add some batteries to the birdbath, so that the excess solar power can be stored and to power the pump at night. For a 24 hour fountain, you will need:

1) The right battery:

Because the pump is only 6 volts, a 12 volt battery is more than enough. It should be a deep cycle battery (car battery) that can store the power for a longer time.

Charge Controller:

This is not essential, but it prevents your battery from over-charging. So it can really extend the life of the battery. It will be wired up between the solar panels and the battery.

Over and above it being affordable to build, what I like about putting together my own solar powered pump birdbath, is that once the first one is finished, making the second or third one just gets easier. It could even be a fantastic gift for a close friend or newly wed.

If you want to make your own solar panel for the birdbath, then have a look at the Earth4Energy Sneak Peek – a FREE preview of the top-rated step-by-step solar power guide. It may also help to read the Earth4Energy Review.

If you are thinking of doing a few upgrades to your garden, have you ever thought of getting a solar powered pump birdbath? In fact, why buy one, when you can make it?

So why would you want to make a solar powered pump birdbath?

The pros to getting one are:

a: The moving water in the fountain stop its from going stagnant

b: The pump does not have to plugged into your power supply

c: No inverter is needed since the pump operates on direct current.

d: The pump uses minute power (only 6volts) so very few solar panels are needed

e: Batteries are optional, since you usually only want the fountain to operate in the day when the birds are around.

f: You can save more money by making the entire birdbath and fountain yourself, even the solar panels.

g: The birdbath can be placed anywhere in your garden, without the need for unsightly wires.

What parts and materials are needed to build a solar powered pump birdbath?

The easiest way is to simply buy a birdbath with a pump and fountain already fitted. Then all you need to do is wire up some small solar panels.

The alternative is to, and more DIY approach is to buy a birdbath that is ready for a fountain pump to be installed (it has the right holes, and a place for the pump to be installed), and then add the various pump and power components.

If you go the DIY route, then you will need to get:

A Birdbath

It does not matter what birdbath you buy, but make sure there is a place for the fountain to be added. A few options for you would be copper, terracotta, cascading, ceramic, or resin birdbath fountains.

The Fountain Spout:

This attachment can be source from your nearby hardware store or garden center. It is an optional extra that helps make the water spout out of the top, instead of a small trickle.

Small Fountain Pump:

Depending your birdbath size, the volume of water to be pumped and how high you want to pump it, will help you decide on the voltage and size pump needed. For your average, medium-sized birdbath, a small 6 volt DC pump will suffice.

Tubing for irrigation:

This tubing generally should be narrow enough to keep the water pressure high, so that the water can be pumped properly. My advice would be to visit the nearby garden center and have a look at what piping is used.

Silicon Sealant:

Silicon sealant helps fill any cracks where water could escape, such as where the tubing enters the top of the birdbath. It can also be used to insulate any bare wires.

The Solar Panels:

This is what makes this birdbath unique to your average water fountain. Depending on what size pump you buy, will need to get enough solar panels for the fountain to work properly. A a typical 6 volt pump, you will require solar panels with a capacity of at least 6 volts. But is better to be on the safe side and get a 12 volt solar panel instead, for times when it is cloudy and for late afternoons.

NB: For the solar panels, there are two options:

1 : Buy a small expensive solar kit from Wallmart or Target or any other local supplier.

2: Make your own solar panel. This is actually much easier than people make it out to be. With the right instructions you could build your own panel in an afternoon. If you want to go the diy way, then keep reading…

For the solar panel to operate effectively it needs to be fitted in a frame and angled in the direction of the sun. Placing it under a tree will not help.

How simple is it to build?

If you have all the tools and materials and any diy experience, you could have a working solar powered pump birdbath within in a matter of hours – that’s if all goes to plan…

A nice added extra is to hook up some batteries to the system. That way you can store any excess power, and the pump could run all day and night. If you do want the fountain to operate for 24 hours, then you will need the following:

1) The right battery:

Since the system is small, a 12 volt battery should be enough. This will be wired up between the charge controller and the pump.

Charge controller:

This is not that important, but to protect the battery from over-charging and to maximize it lifespan, you should a charge controller that sits between the solar panels and the battery.

The nice thing about about building a solar powered pump birdbath yourself is that it is not only cheaper, but once you know how, you can make as many as you want. It could also make a great gift for an energy conscious friend or family member.